 |
 |
 |
 |
 |
ESD Rubber Mat
|
|
MS-021401
ESD Rubber Mat |
ESD rubber mat or conductive
ground mats should be laid out in the workshops and advanced
laboratories for microelectronic industries such as electronic
semi-conduct devices, electronic computers, electronic communication
equipment and integrated circuits etc. To eliminate damages caused
by static electricity. When ESD rubber mat (ground mats) are laid
out and grounded, the working surface will discharge the static
electricity of human bodies so that a near-equipotential can be
maintained for ESEDS tweezers, tools, utensils and instruments,
through which human bodies contact the working table and static
sensitive devices (SSD) are free from broadband interference
produced by static discharging such as triboelectrification etc. In
this way, electrostatic protection is realized. |
|
MS-021401
ESD Rubber Mat |
 |
| |
ESD rubber mat are mainly
made of anti-static (conductive) and static-dissipative materials,
and synthetic rubber. The surface layer is a 0.5mm thick
static-dissipative layer. The bottom layer is a 1.5mm conductive
layer. Generally,2mm thick double-layer structure is used. The
available colors include green, gray, blue, black and yellow etc.*Resistivity
of surface layer：107-10Ω9
*Resistivity of bottom layer：103-10Ω5
*Rattler loss：<
0.02g/cm2
*Time for static dissipation：<
0.5S
*Length, width, thickness and colors are selectable
Conductive ground mats are made of quality conductive material
and synthetic rubber.
Resistivity of surface and bottom layers：103Ω-105Ω.The
black color is normally used. |
|
|
 |
 |
 |
 |
 |
 |
 |
|