By automating the complex task of process setup the SlimKIC 2000 makes profiling so easy that any operator can quickly achieve the optimal process.

SlimKIC 2000 Thermal Profiler runs on KIC 2000 software and is available in two models: Dual and Datalogger

KIC  Navigatorä  process setup tool

KIC’s powerful new Navigator software is a system that automatically determines the single best oven recipe for every product. You give the Navigator your profile specs and the Navigator tells you how to set the oven to achieve that profile. The Navigator automatically evaluates billions of combinations of conveyor speeds and setpoint temperatures in less than a minute, so operators with limited process knowledge can find the optimal profile every time.

KIC Navigator process setup tool, runs on KIC2000 software and requires a software access key.

KIC   Pilotä  oven setup tool

KIC Pilot oven setup tool with graphical interface, runs on KIC2000 software and comes on a CD-ROM and Uses a software access key. The KIC Pilot includes the KIC Navigator tool and requires the SlimKIC 2000 Thermal Profiler

KIC24/7ä  Thermal Manager    

The KIC 24/7 brings an innovative level of automation and management to the thermal process. You get real-time, around-the-clock: Process monitoring, SPC charting, Zero-defect production, Thermal analysis, Documentation, and Production traceability ALL in a single, intuitive product.

KIC 24/7ä Thermal Manager runs on the KIC24/7 Software for use with the SlimKIC 2000 Dual or Datalogger.

Prophet  kit Thermal Manager

The Prophet System continuously records product temperatures as they move through the thermal process and estimates the actual profile for every product -- virtually eliminating periodic profiling. The instant a profile falls outside defined limits an alarm sounds, and can optionally shut down the feed conveyor giving you a zero defect production tool.

Prophet Thermal Manager runs on WinKIC 2.3 software

Slimkic   II Thermal Profiler

With the SlimKIC you see the thermal profile as it happens. Wireless transmission provides valuable insight into your temperature profile. Establish your process window for each product by setting limits for all desired statistics and color-coded displays provide instant analysis and reduce production downtime.

SlimKIC II Thermal Profiler runs on WinKIC 2.3 software.

Xpert Ready SuperM.O.L.E. Gold

SuperM.O.L.E. Gold - The Power Behind The ECD Product and Process Thermal Profiling System.

Xpert Ready SuperM.O.L.E. Gold RF

Thermal Profiling - The Power of Real-Time                                                                              

OvenWATCH - Product Quality Monitoring System

The easy-to-use, 24 hour, Product Quality Monitoring System for your Reflow Oven

WaveRider

WaveRIDER's unique design allows operators and maintenance personnel to easily perform routine operation checks and troubleshooting diagnostics in just a few minutes. Quickly measure and print conveyor speed, solder wave and pre-heat parameters. 

OvenRider

The OvenRIDER  is an innovative system for providing critical setup and performance data of reflow ovens. The OvenRIDER® captures continuous process data for air temperature, heat flow (the oven's ability to transfer heat to an object), zone location and conveyor speed.

The New ECD AutoM.O.L.E.®Xpert

·   A tool for target profile planning

·   A system for automatic oven setup

·   An instrument for automatic profile verification

·   Reduces setup/changeover time by 60%

·   Insures consistent PCB quality at all worldwide locations

Fluxometer - Spray Flux Uniformity Measurement System

The Fluxometer  process monitor provides easy and rapid qualification of the spray flux top-side board penetration and uniformity.

DataWorker 5 Portable Datalogger

The Model 50 (DataWorker 5) is a portable, multi-programmable 5-Channel Logger.

DataWorker 10/40 Bench Top Datalogger

The Model 5000 Datalogger Series (Dataworker 10/40) includes the 5100 Benchtop and 5200 Wall Mount models, both with a choice of Plug-on Devices (PODs) that can log 10 or 40 channels of thermocouple or voltage data.

Please contact VS Solution for more information